/
Questions/
Report/
Using an energy method of your choice, calculate the deflection at point B for the beam depicted: Mechanics of Materials Report, UOL, UK
Looking For Plagiarism Free Answers For Your UK College/ University Assignments.
BUY NOWUsing an energy method of your choice, calculate the deflection at point B for the beam depicted: Mechanics of Materials Report, UOL, UK
University | University of Leicester (UoL) |
---|---|
Subject | . |
- Part A: Energy methods
- Question 1
- Using an energy method of your choice, calculate the deflection at point B for the beam depicted in Figure 1. The second moment of area of the beam is I, with Young’s modulus E.
- Express the answer as a function of E, I, L, and M0. You must use an energy method and explain your steps. (You are of course free to use any other method to check your result)
- Question 2:
For the beam depicted in Figure 2, calculate the reactions at all three supports (second moment of area I, Young’s modulus E).
(It is obvious that this problem is statically indeterminate. You could use the double-integration method or Macauley’s singularity functions. However, an energy method is significantly quicker here. We have not discussed this method directly in the lectures and tutorials and it is suggested that you carry out a bit of research if you want to use it. It is worth it.)
Do You Need Assignment of This Question
- Part B: Fatigue
You are analyzing the possible failure mechanisms on the shaft of a pump.
The pump is gear-driven at a uniform load and speed. The shaft is supported by bearings mounted in the pump housing. The shaft is made of steel with ultimate tensile strength Su, and yield strength Sy. The tangential, axial, and radial components of force applied to the gear are shown in figure 3.
The surface of the shaft fillet has been shot-peened, which is estimated to be equivalent to a laboratory mirror-polished surface.
- Question 1
Calculate the Factor of Safety for static yielding. (It is possible that your result is below 1)
Please refer to the techniques taught in the year 2 modules: “Stress Analysis”. You should relate the stresses at the most critical location to the loads. Recall that some loads can contribute to different kinds of loadings. Use a suitable static failure criterion!
- Question 2
Calculate the Factor of Safety for fatigue failure for a life of 5.105. (It is possible that your result is below 1).
Consider carefully which loads are cyclic and which loads are not. This is quite a lengthy procedure; make sure you break it down into sensible steps. Make also sure that you clearly identify the approximations you are using, and that you reference the origin of the tools (charts/graphs, etc…) that you are using to obtain certain parameters.
- Question 3
Considering that the data retrieved from literature or provided by the manufacturer may not be reliable, you decided to test the specimen in the laboratory yourself. Find the relevant standards for obtaining the relevant material data for your design, provide a brief description of the specimens and procedures in your report.
Buy Answer of This Assessment & Raise Your Grades
Get help by expert
Looking for high-quality TEFL assignment help UK? Look no further than the experts at Diploma Assignment Help UK. We provide top-notch assignment help for TEFL students in the UK, offering comprehensive and personalized support from highly trained professionals. Our team of knowledgeable writers and editors can help you create an impeccable paper that meets all academic standards. So, get in touch with us today, and let us take care of your assignments for you.
Recent solved questions
- ILM: Assess own leadership behaviours and potential in the context of a particular leadership model and own organisation's working practices and culture: Leadership skills and development, Assignment, UOA, UK
- ILM: Describe the factors that will influence the choice of leadership styles or behaviours in workplace situations: Leadership skills and development, Assignment, UOA, UK
- ATHE Level 7 Unit 5 : You Have Been A Senior Manager For Several Years And Have Decided That Your Next Career Move Should Be To Take Responsibility: Personal Development for Leadership and Strategic Management Assignment, UK
- You are required to prepare a 5-year strategy review to shareholders for evaluating the business simulation: 5-year strategy review to shareholders, Report, UOEL, UK
- CMI Unit 502: Approaches to achieving a balance of skills and experience in a team: Principles of Developing, Managing and Leading Individuals and Teams, Assignment, UK
- CMI Unit 502: Principles of Developing, Managing and Leading Individuals and Teams, Assignment, UK
- UNIT-701: How the principles of strategic leadership can be applied to respond to complex organisational challenges: Strategic Leadership, Assignment, CMI, UK
- UNIT- 701: The leadership behaviours and skills required to deliver strategic goals: Strategic Leadership, Assignment, CMI, UK
- UNIT- 701: Understanding of how the organisational context influences management and leadership practice: Strategic Leadership, Assignment, CMI, UK
- Evaluate the concept of evidence-based practice and assess how approaches to evidence-based practice: Evidence - based practices, Report, UOH, UK